Pan Reverse; Tilt Reverse; Pan Degree; Encoders - High End Systems SolarFrame 750 User Manual

Pan Reverse

This menu provides access to reverse the fixture's pan movement.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Set" option displays, then press [Enter]. The "Set" menu displays.
3. Tap the [Up] or [Down] button until the "Status" option displays, then press [Enter]. The "Status" menu dis-
plays.
4. Press the [Up] or [Down] button until "Pan Reverse" displays, then press [Enter]. The current setting for
pan reverse displays (default setting is "Off").
5. Press [Up] or [Down] to modify the selection.
6. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.

Tilt Reverse

This menu provides access to reverse the fixture's tilt movement.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Set" option displays, then press [Enter]. The "Set" menu displays.
3. Tap the [Up] or [Down] button until the "Status" option displays, then press [Enter]. The "Status" menu dis-
plays.
4. Press the [Up] or [Down] button until "Tilt Reverse" displays, then press [Enter]. The current setting for tilt
reverse displays (default setting is "Off").
5. Press [Up] or [Down] to modify the selection.
6. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.

Pan Degree

This menu provides access to change the fixtures pan rotation from its default 540 degrees to 630 degrees.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Set" option displays, then press [Enter]. The "Set" menu displays.
3. Tap the [Up] or [Down] button until the "Status" option displays, then press [Enter]. The "Status" menu dis-
plays.
4. Press the [Up] or [Down] button until "Pan Degree" displays, then press [Enter]. The current setting for pan
degree displays (default setting is "540").
5. Press [Up] or [Down] to modify the selection.
6. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.

Encoders

This menu provides access to switch encoder feedback for pan and tilt movement.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Set" option displays, then press [Enter]. The "Set" menu displays.
3. Tap the [Up] or [Down] button until the "Status" option displays, then press [Enter]. The "Status" menu dis-
plays.
4. Press the [Up] or [Down] button until "Encoders" displays, then press [Enter]. The current setting for feed-
back displays (default setting is "On").
5. Press [Up] or [Down] to modify the selection.
6. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.
29