Table of Contents
Advertisement
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Test" option displays, then press [Enter]. The "Test" menu dis-
plays.
3. Tap the [Up] or [Down] button until the "Test Channel" option displays, then press [Enter]. The "Test Chan-
nel" menu displays with "Control" begin the first channel selected. The fixture automatically begins a self
test procedure for the extents of the fixture control features.
4. Press the [Up] or [Down] button to cycle through all fixture channels individually. As each channel is selec-
ted, the test will automatically begin for the displayed channel.
5. Press the [MODE/ESC] button to exit the "Test Channel" mode and return the display to the previous
menu.
Manual Ctrl.
This menu provides access to manually set each fixture channel value individually.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Test" option displays, then press [Enter]. The "Test" menu dis-
plays.
3. Tap the [Up] or [Down] button until the "Manual Ctrl." option displays, then press [Enter]. The "Manual Ctrl"
menu displays.
4. Press the [Up] or [Down] button to cycle through the available fixture channels, and press [Enter] to select.
The selected fixture channel displays with the default channel value.
5. Press the [Up] or [Down] button to modify the value (000 - 255).
6. Press [Enter] to select the new value and return to the "Manual Ctrl" menu.
7. Press the [MODE/ESC] button to exit "Manual Ctrl." menu and return the display to the previous menu.
Calibration
This menu provides access to adjust the fixture's calibration features, modifying the home position. The cal-
ibration menu password is "050". This password must be supplied first, then the additional calibration menus will
be accessible.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Test" option displays, then press [Enter]. The "Test" menu dis-
plays.
3. Tap the [Up] or [Down] button until the "Calibration" option displays, then press [Enter]. The "Calibration"
menu displays.
4. Press [Enter] to select "Password" and use the [Up] button to select "050", then press [Enter]. The display
returns to the previous menu.
5. Press the [Up] or [Down] button to cycle through all available calibration features and press [Enter] to
select. The selection displays with the default channel value.
6. Press the [Up] or [Down] button to modify the value and press [Enter] to select and return to the "Cal-
ibration" menu.
7. Press the [MODE/ESC] button to exit the "Calibration" menu and return the display to the previous menu.
35
Advertisement
Table of Contents
