Edit Program - High End Systems SolaHyBeam 2000 User Manual

Auto Program
With this function, you can run the internal program. You can select the desired program under "Select
prog.". You can set the number of steps under "Edit prog.". You can edit the individual scenes under
"Edit scenes". With this function, you can run the individual scenes either automatically, i.e. with the
adjusted Step-Time.
1． Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Preset" is
displayed. Press ENTER, the display will show "Preset". Tap the <Up/Down>button until the
display will show "PlayBack". Press ENTER, the display will show "PlayBack".
2． Tap the <Up/Down>button until "Auto Program" is displayed.
3． Press ENTER, the display will show "Auto Program".
4． Tap the <Up/Down>button，the display will show "Master1", "Alone".
5． Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
Select programs
With this function, you can select the program for the Program Run.

Edit program

With this function, you can edit the internal programs.
Edit scenes
With this function, you can edit the scenes of the internal programs.
Scenes Input
1． Tap <MODE/ESC> button，access the main menu，Tap the <Up/Down> button until "Edit
grogram" is displayed. Press ENTER, the display will show "Edit grogram".
2． The display show "Select programs", Press <Up/Down>, the display will show "Edit Program",
"Edit Scenes", and "Rec. Controller".
3． Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
SolaHyBeam 2000 User Manual
34
v1.3