Table of Contents
Advertisement
Pan/Tilt Spd
This menu provides access to change the speed (scan mode) of pan and tilt movement.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Set" option displays, then press [Enter]. The "Set" menu displays.
3. Tap the [Up] or [Down] button until the "Status" option displays, then press [Enter]. The "Status" menu dis-
plays.
4. Press the [Up] or [Down] button until "Pan/Tilt Spd" displays, then press [Enter]. The current speed setting
displays.
5. Press [Up] or [Down] to modify the selection.
6. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.
Hibernation - Standby mode
Hibernation mode forces the LEDs and stepper motors to power off when the fixture loses DMX control signal for
a set period of time. The default time setting is 15 minutes.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Set" option displays, then press [Enter]. The "Set" menu displays.
3. Tap the [Up] or [Down] button until the "Status" option displays, then press [Enter]. The "Status" menu dis-
plays.
4. Press the [Up] or [Down] button until "Hibernation" displays, then press [Enter]. The current setting dis-
plays. The default setting is "15 minutes").
5. Press [Up] or [Down] to modify the selection(1 - 99 minutes or set the mode to "Off").
6. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.
Defogger
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Set" option displays, then press [Enter]. The "Set" menu displays.
3. Tap the [Up] or [Down] button until the "Status" option displays then press [Enter]. The "Status" menu dis-
plays.
4. Press the [Up] or [Down] button until "Defogger" displays, then press [Enter]. The current setting displays.
The default setting is "Defog OnOP" which means the defogger is enabled when the LEDs are above 0%
intensity.
5. Press [Up] or [Down] to modify the selection. Options include "Defog OnOP" (when LEDs are above 0%
intensity), "Defog OnPwr" (always heating front lens when powered), and "Defog Off" (defogger is dis-
abled).
6. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.
Select Input
Set the control input for the fixture.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Set" option displays, then press [Enter]. The "Set" menu displays.
3. Tap the [Up] or [Down] button until the "Select Input" option displays, then press [Enter]. The "Select Input"
menu displays.
4. Press [Up] or [Down] to modify the selection (options include "DMX Only", "Art-Net On IP2". "Art-Net On
IP10", or "sACN").
5. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.
30
Advertisement
Table of Contents
