Table of Contents
Advertisement
Menu Navigation and Overview
SolaFrame 750 fixtures can be programmed through the on board user interface and menu system. This section
describes how to navigate the menu using the user interface buttons as well as provides an overview of the
menu and the available settings for each selection.
Navigation
Note:
The display is powered by battery when the fixture has no power. Press and hold
the [MODE/ESC] button for three seconds to turn on the display using battery power.
When the fixture is powered on, and no data signal is present after one minute of time has
lapsed, the display will switch off.
1. Press and hold the [MODE/ESC] button until the display flashes.
2. Browse the menu by pressing the up, down, left, or right navigation buttons.
3. Press the Enter button
4. Modify the selection by pressing the up, down, left, or right navigation buttons according to the selection.
5. Press the Enter button
Note:
tons are pressed, the unit will automatically return the display to the default display.
6. To exit the menu, press the [MODE/ESC] button.
to select a menu item.
to confirm a modified selection.
10 seconds after committing to a new mode or selection, and no further but-
22
Advertisement
Table of Contents
