Table of Contents
Advertisement
Safety Considerations
This fixture has left the factory in perfect condition. In order to maintain this condition and to ensure safe oper-
ation, it is necessary for the user to follow the safety instructions and warning notes written in this user manual
and otherwise instructed by the manufacturer representative.
The SolaFrame 750 fixture is intended for professional use only. Not for residential use. Read the entire
l
manual before using this equipment.
The SolaFrame 750 fixture is not user serviceable. Field modifications of the unit will void your warranty.
l
WARNING:
Disconnect the unit from power and DMX before servicing.
l
Replace fuses with the specified type and rating only.
l
Do not mount the fixture on or near flammable surfaces.
l
NEMA Type 1 Enclosure, indoor use, dry locations only. Do not use outdoors. This fixture is intended for
l
use where humidity does not exceed 90% (non-condensing).
This equipment is designed for operation by qualified personnel only.
l
Do not use this fixture with a damaged power lead (cord set). If the lead is damaged, it must be replaced
l
with an equivalent type before use. Contact your local authorized dealer for spare power leads.
Do not use this fixture if the lens is damaged. Damaged lenses must be replaced before use. Contact
l
your local authorized dealer for a replacement.
When the fixture has been stored or transported in cold temperatures, allow it to warm to room tem-
l
perature for a minimum of one hour before applying power. Applying power to a cold fixture will cause
damage to the fixture and void the manufacturer warranty.
CAUTION:
and servicing.
CAUTION:
warranty. The authorized dealer will not accept liability for any resulting defects or
problems.
For your safety, read the following warnings and notices before use:
Hot Surfaces. Allow the fixture to cool completely before handling
Damages caused by the disregard of this user manual are not subject to
11
Advertisement
Table of Contents
