Table of Contents
Advertisement
perature is shown in Celsius by default. To change the scale to °F, reference the Set>Temp. C/F menu.
4. Press [Enter] or press the [MODE/ESC] button to return to the previous menu.
Fan Speed
This menu displays the speed of the fixture's fans. Values are shown in RPM.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Info" option displays, then press [Enter]. The "Info" menu displays.
3. Tap the [Up] or [Down] button until the "Fan Speed" option displays, then press [Enter]. Each of the four fix-
ture fans in the fixture are displayed with their current speed (in RPM's).
4. Press [Enter] or press the [MODE/ESC] button to return to the previous menu.
Ethernet IP
This menu displays the current set fixture IP address information.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Info" option displays, then press [Enter]. The "Info" menu displays.
3. Tap the [Up] or [Down] button until the "Ethernet IP" option displays, then press [Enter]. The current fixture
Ethernet IP address information is shown.
4. Press [Enter] or press the [MODE/ESC] button to return to the previous menu.
Software Ver
This menu displays the current software version for the fixture.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Info" option displays, then press [Enter]. The "Info" menu displays.
3. Tap the [Up] or [Down] button until the "Software Ver" option displays, then press [Enter]. The current fix-
ture software version is shown.
4. Press [Enter] or press the [MODE/ESC] button to return to the previous menu.
27
Advertisement
Table of Contents
