Table of Contents
Advertisement
1. Assemble the third party clamp or Omega clamp to the Omega bracket and secure together using appro-
priately sized hardware (not provided).
2. Align the assembled Omega bracket and quick lock fasteners into the respective holes on the bottom of
the fixture upper enclosure.
3. Tighten each of the quick lock fasteners fully, turning clockwise. You will hear and feel a click when the
fastener is fully secured.
4. Repeat steps 1 through 3 for the second clamp and bracket.
5. Attach the provided safety cable through the attachment point on the bottom of the fixture upper enclos-
ure and secure to the trussing system or other safe installation point. Follow local codes and recom-
mended safety standards for securing the fixture to the installation location.
6. Attach the fixture to the installation location using the installed clamps, using the clamp manufacturers
instructions for a secure fit. When using the Omega clamp, close the safety and fully tighten the clamp
wing nut until secure.
7. Inspect the installation prior to lifting the fixture over head.
14
Advertisement
Table of Contents
