Table of Contents
Advertisement
5. Use the [Up] or [Down] buttons to modify the selection (2 - 60 minutes).
6. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.
Flip Display
This menu enables the display to be rotated 180°. Used for best user experience in a vertical installation.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Set" option displays, then press [Enter]. The "Set" menu displays.
3. Tap the [Up] or [Down] button until the "Disp. Setting" option displays, then press [Enter]. The "Disp. Set-
tings" menu displays.
4. Press the [Up] or [Down] button until "Flip Display" displays, then press [Enter]. The current setting dis-
plays. By default this setting is set to "OFF".
5. Use the [Up] or [Down] buttons to modify the selection (ON will reverse the display 180° from a current
OFF setting).
6. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.
Key Lock
This menu activates the automatic key lock feature, locking the user interface buttons from activity.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Set" option displays, then press [Enter]. The "Set" menu displays.
3. Tap the [Up] or [Down] button until the "Disp. Setting" option displays, then press [Enter]. The "Disp. Set-
tings" menu displays.
4. Press the [Up] or [Down] button until "Key Lock" displays, then press [Enter]. The current setting displays.
By default this setting is set to "OFF".
5. Use the [Up] or [Down] buttons to modify the selection. When active, set to ON, the keys will be locked
automatically after exiting edit mode.
6. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.
Note:
To enable the user interface buttons again after enabling the key lock feature, press
and hold the [MODE/ESC] button for three seconds.
Temp. C/F
This menu provides settings for the temperature scale.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Set" option displays, then press [Enter]. The "Set" menu displays.
3. Tap the [Up] or [Down] button until the "Temp. C/F" option displays, then press [Enter]. The "Temp C/F"
menu displays and the current setting. "Celsius" is the default setting.
4. Use the [Up] or [Down] buttons to modify the selection.
5. Press [Enter] to commit to the change or press the [MODE/ESC] button to return to the previous menu.
ResetDefault
This menu resets the fixture settings to the factory defaults.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Set" option displays, then press [Enter]. The "Set" menu displays.
33
Advertisement
Table of Contents
