Table of Contents
Advertisement
Preset
PlayBack
This menu is provided to set the fixture's playback settings. Playback settings designate a fixture for
DMX Control, set to run an Auto Program as a master or in stand alone mode, or set for slave mode where play-
back information is received from a different master.
Preset programming requires one fixture to act as the Master. All other SolaFrame 750 fixtures on the link can
then be set a slaves to playback the designated master's presets. Slave fixtures receive all their preset para-
meter and timing information from the master fixture.
Example: The following example shows the relationship between programs, partitions, and scenes as
programmed on the Master and how slave fixtures are assigned.
Groups of scenes are edited into Programs 1– 10 on the fixture designated as Master
- Program 2 is assigned to Part 1
- Program 4 is assigned to Part 2
- Program 6 is assigned to Part 3
* Fixtures assigned as Slave 1 will playback Part 1
* Fixtures assigned as Slave 2 will playback Part 2
* Fixtures assigned as Slave 3 will playback Part 3
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Preset" option displays, then press [Enter]. The "Preset" menu dis-
plays.
3. Tap the [Up] or [Down] button until the "PlayBack" option displays, then press [Enter]. The "PlayBack"
menu displays.
4. Press the [Up] or [Down] button to cycle through all available playback options (listed below). Press
[Enter] to make the selection.
DMX Control - reverts the function from Auto Program to DMX receive. Selecting this option
l
returns the display to the main status screen where DMX Receive will be displayed as the cur-
rently selected function.
36
Advertisement
Table of Contents
