Table of Contents
Advertisement
Last Run Hrs
This menu displays the running time of the lamp from the last power. The current value is shown in hours (h).
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Info" option displays, then press [Enter]. The "Info" menu displays.
3. Tap the [Up] or [Down] button until the "Time Info." option displays, then press [Enter]. The "Time Info"
menu displays.
4. Tap the [Up] or [Down] button until the "Last Run Hrs" option displays, then press [Enter]. The lamp run-
ning time since the last power on displays. All time is shown in hours.
5. Press [Enter] or press the [MODE/ESC] button to return to the previous menu.
LED Hours
This menu displays the total running hours of the fixture LEDs. The current value is shown in hours (h).
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Info" option displays, then press [Enter]. The "Info" menu displays.
3. Tap the [Up] or [Down] button until the "Time Info." option displays, then press [Enter]. The "Time Info"
menu displays.
4. Tap the [Up] or [Down] button until the "LED Hrs" option displays, then press [Enter]. The accumulated
time that LED's in the fixture have emitted light displays. All time is shown in hours.
5. Press [Enter] or press the [MODE/ESC] button to return to the previous menu.
Timer PIN
This menu displays and allows you to set the timer password. The default Timer PIN is "038".
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Info" option displays, then press [Enter]. The "Info" menu displays.
3. Tap the [Up] or [Down] button until the "Time Info." option displays, then press [Enter]. The "Time Info"
menu displays.
4. Tap the [Up] or [Down] button until the "Timer PIN" option displays, then press [Enter]. The "Timer PIN"
menu displays.
5. Tap the [Up] or [Down] button to change the pin value. The default PIN code is "038".
6. Press [Enter] to apply a change or press the [MODE/ESC] button to return to the previous menu.
Clr Last Run
This menu is protected by password, accessible only when the Timer PIN has been provided in the previous
menu. When accessed, this menu enables you to clear the last run time of the fixture.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Info" option displays, then press [Enter]. The "Info" menu displays.
3. Tap the [Up] or [Down] button until the "Time Info." option displays, then press [Enter]. The "Time Info"
menu displays.
4. Tap the [Up] or [Down] button until the "Clr Last Run" option displays, then press [Enter].
5. Press the [Up] or [Down] button to change the setting to either Yes or No.
6. Press [Enter] to apply a change or press the [MODE/ESC] button to return to the previous menu.
LED Time PIN
This menu displays and allows you to set the LED time password. The default LED Time PIN is "038".
25
Advertisement
Table of Contents
