Chapter 1 Router Installation; Introduction; Recycling And The Environment - Teldat C Installation Manual

1 Router Installation

Chapter 1 Router Installation

1.1 Introduction

The Teldat C/S/G/A is a general purpose IP router family suitable for a wide range of applications (personal, SOHO/
SME and corporate environments). These devices adapt to plenty of IP scenarios: providing simultaneous access to
Internet for private LAN users, accommodating teleprocessing networks and supporting both SNA and POS (Point of
Sale terminals – dataphones).
The Teldat C/S/G/A models cover the access needs for ADSL (both over PSTN and ISDN), SHDSL, GSM/
GPRS/EDGE/CDMA, ISDN, internal dial-up modem and serial line (connected to an external telephone modem,
Frame Relay, X.25 etc.).
This manual shows you how to install and connect these routers.
Teldat C/S/G/A
Fig. 1:
Fig. 2: Teldat C6 routers(with rack adaptors): External aspects

1.1.1 Recycling and the Environment

Please do not, under any circumstances, throw away any Teldat C/S/G/A routers with normal domestic waste. Ask
your local town hall for information on how to correctly dispose of them in order to protect the environment against e-
waste. Always respect the current laws regarding waste material. Anyone found violating the environmental laws will
be subject to fines and any additional steps established by law.
All the packing materials, i.e. the cardboard box, plastic and any other packaging, together with the pieces making up
a Teldat C/S/G/A , must be recycled complying with the current applicable law.
The above symbol, with a cross over the rubbish container, can be seen on the device. This means that, when a
2
routers (except for C6): External aspect
Teldat C/S/G/A Routers Family Installation Manual
Teldat S.A.