Engine Removal - KYMCO MOVIE 125 Manual

6
. ENGINE REMOVAL/INSTALLATION

ENGINE REMOVAL

Disconnect the battery negative cable.
Remove the frame body cover. ( 2-2)
Disconnect the engine negative cable.
Disconnect the spark plug high tension wire.
Disconnect the auto bystarter wire connector.
Disconnect the starter motor cable from the
starter relay.
Remove the spark plug cap and disconnect
the ignition coil wire from the set plate.
Disconnect the fuel tube at the carburetor
side.
Disconnect the auto fuel valve vacuum tube
from the tee tube.
Disconnect the throttle cable from the
carburetor.
Loosen the drive belt air cleaner connecting
tube band screw and remove the connecting
tube.
Auto Bystarter Wire
Connector
Ignition Coil Wire Starter Relay
Connecting Tube
Starter Motor Cable
Vacuum Tube
Fuel Tube
Tee Tube
Screw
6-2