Starting The Engine - KYMCO Dink-R125 Manual

Starting the Engine

Always follow the proper starting procedure
described here and on the following pages.
˙
Lift up Main Stand before starting the engine.
˙
Check oil and gasoline content before starting
the engine.
1.Unlock keyless(Dink-R 150).
2.Turn Main Switch to
3.Make sure the throttle grip is fully closed.
4.Make sure the Side Stand is retrieved.
To prevent damage to the starter motor, do not
operate the starter motor for more than 5 seconds
at a time. If fail to start successfully, check the fuel
level and the battery condition, and waiting for 15
seconds between each fail to start.
To protect the catalytic converter in the engine's
exhaust muffler, avoid idling too long and do not
use leaded gasoline.
40
OPERATION
position.
CAUTION
CAUTION