Rear Brake - KYMCO MOVIE 125 Manual

13
. REAR WHEEL/REAR BRAKE/
REAR SUSPENSION
REAR WHEEL
REMOVAL
Remove the exhaust muffler joint lock nuts
and exhaust muffler lock bolts.
Remove the exhaust muffler. ( 2-6)
Remove the rear axle nut to remove the rear
wheel.
INSPECTION
Measure the rear wheel rim runout.
Service Limits:
Radial: 2.0mm replace if over
Axial: 2.0mm replace if over
If the rim runout exceeds the specified service
limits, check the final shaft bearing for
excessive play and the final shaft for bending.
Inspect the rear wheel and wheel rim for
runout.
INSTALLATION
Install the rear wheel and apply SAE30#
engine oil to the axle shaft threads. Then,
tighten the rear axle nut.
Torque: 11.0_
Install the exhaust muffler. ( 2-6)
Tighten the exhaust muffler joint lock nuts
and exhaust muffler lock bolt.
Torque:
Exhaust muffler joint lock nut: 1.2kg-m
Exhaust muffler lock bolt: 3.5kg-m

REAR BRAKE

Remove the rear wheel. ( 13-2)
Inspect the rear brake drum.
Measure the rear brake drum I.D.
Service Limits: 111mm replace if over
13.0kg-m
Rear Axle Nut
Rear Axle Nut
13-2