KYMCO MOVIE 125 Manual page 210

19
. EXHAUST EMISSION CONTROL
SYSTEM
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• During operation, be careful to avoid scalding caused by the exhaust muffler.
• Note the locations of tubes for proper installation.
• Replace any damaged tube with a new one.
• Make sure to tighten the connector of each tube securely
TOOLS
• Vacuum pump
SPECIFICATIONS
Air injection cut-off valve actuating pressure－
250mm/Hg－ 30 liter/min.
Reed valve stopper clearance－ 4.6mm
19-3