KYMCO MOVIE 125 Manual page 174

15
. IGNITION SYSTEM
TROUBLESHOOTING
High voltage too low
• Weak battery or low engine speed
• Loose ignition system connection
• Faulty CDI unit
• Faulty ignition coil
• Faulty pulser coil
Normal high voltage but no spark at plug
• Faulty spark plug
• Electric leakage in ignition secondary circuit
• Faulty ignition coil
Good spark at plug but engine won't start
• Faulty CDI unit or incorrect ignition timing
• Improperly tightened A.C. generator flywheel
No high voltage
• Faulty ignition switch
• Faulty CDI unit
• Poorly connected or broken CDI ground wire
•Dead battery or faulty regulator/rectifier
• Faulty ignition coil connector
• Faulty pulser coil
15-2