KYMCO MOVIE 125 Manual page 117

10
. FINAL REDUCTION
SERVICE INFORMATION ......................10-1
TROUBLESHOOTING.............................10-1
FINAL REDUCTION DISASSEMBLY....10-2
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• When replacing the drive shaft, use a special tool to hold the bearing inner race for this operation.
SPECIFICATIONS
Specified Oil: GEAR OIL SAE 90#
Oil Capacity:
TORQUE VALUES
Transmission case cover bolt
SPECIAL TOOLS
Driver handle A
Outer driver, 32x35mm
Outer driver, 37x40mm
Outer driver, 42x47mm
Pilot, 15mm
Pilot, 17mm
Pilot, 20mm
Crankcase assembly tool
- Assembly shaft
- Assembly collar
TROUBLESHOOTING
Engine starts but motorcycle won't move
• Damaged transmission
• Seized or burnt transmission
Oil leaks
• Oil level too high
• Worn or damaged oil seal
10-1
At change : 0.09 liter
At disassembly : 0.11 liter
1.2kg-m
FINAL REDUCTION INSPECTION.....10-2
BEARING REPLACEMENT .................10-3
FINAL REDUCTION ASSEMBLY .......10-4