Status Leds; Table 3. Front Panel Leds - Olicom CrossFire 8720 Installation Manual

2

1.2.2 Status LEDs

#
2 Status
1 ClearSession
3 Fault
4 PSU1
5 PSU2
10 Lnk
(at each port)
11 Act
(at each port)

Table 3. Front Panel LEDs

CrossFire 8720 Fast Ethernet Layer 3 Switch, v. 1.00.02, P/N: 710001800
LED State
Off
On
Flashing
Off
On
Flashing
Off
On
Flashing
On
Off
Off
On
On
Off
On or
blinking
Meaning
The switch is not connected to a power
outlet, or the power supply is faulty.
The switch is receiving power.
The switch is initializing.
ClearSession is disabled.
ClearSession is enabled.
ClearSession is recovering.
When the switch is powered on this
indicates normal operation.
The Fault LED is off during normal
operation. If the LED turns on, an error has
occurred. Power the switch down and up
again. The Fault LED should not turn on
again.
Indicates self test upon the switch
initialisation.
The power supply unit 1 operates properly.
The power supply unit 1 does not function.
The power supply unit 2 operates properly.
The power supply unit 2 does not function.
A port is on the network.
A port is not connected to the network.
Data is being transmitted on or received
from a port.
Introduction