Table of Contents
Advertisement
1. Introduction
1.1 About the Switch
The following tables list and describe the connectors, switches and status LEDs on
the CrossFire 8720 Switch.
1.2 Front Panel Details
Figure 1 illustrates the front panel. Components (12) and (13) are expansion slot
covers that you must remove before you can install any optional expansion
module. For further instructions on installing expansion modules, see the UEM
Quick Reference Guide that comes with each module.
6
8
7
Figure 1. CrossFire 8720 Front Panel
1.2.1 Connectors and Push Buttons
#
9
Ports 1 to 16
8
Management
7
Reset
6
Default
Table 2. Front Panel Connectors
CrossFire 8720 Fast Ethernet Layer 3 Switch, v. 1.00.02, P/N: 710001800
4
1
2
3
9
5
Name
UTP 10 Base-T/100 Base-TX Ethernet ports with RJ-45
jacks.
Console connection with DB-9 connector.
Press this button to start a full system reset of the
software and hardware.
Press this button to reset all non-volatile configuration
settings to the original, factory default values and to
start a full system reset of the software and hardware.
10
11
Description
1
12
13
Introduction
Advertisement
Table of Contents
