Dimensions And Weight - HP A6602 Installation Manual

Dimensions and Weight

Table 1-2 Dimensions and weight
Dimensions without feet and rack-mounting ears (H ×
W × D)
Weight
Fixed Interfaces and Slots
Table 1-3 Fixed interfaces and slots
Item
Console port
AUX port
USB interfaces
Combo interfaces
CF card slot
Interface module
slots
An electrical Ethernet interface and its corresponding optical Ethernet interface form a Combo

interface.
The electrical Ethernet interface and optical Ethernet interface of a Combo interface cannot

work simultaneously.
For a Combo interface, the default operating interface is the optical Ethernet interface. You can

switch between the optical Ethernet interface and the electrical Ethernet interface by using the
combo enable { copper | fiber } command in interface view.
For details about the combo enable { copper | fiber } command, refer to HP SR6600 Routers

User Manual.
Item
1 (9600 bps to 115200 bps, 9600 bps by default)
1 (9600 bps to 115200 bps, 9600 bps by default)
USB 0: Type A connector, operating in the host mode
2
USB 1: Type B connector, operating in the device mode
10 Mbps, half duplex/full duplex
Four electrical
Ethernet interfaces: 100 Mbps, half duplex/full duplex
GE 0 to GE 3
1000 Mbps, full duplex
Four optical Ethernet
interfaces: SFP 0 to 1000 Mbps, full duplex
SFP 3
The optional CF cards supported by the A6602 are available in
three sizes:
1
256 MB
512 MB
1 GB
HIM/MIM intermixing is supported.
2
Two HIMs or two MIMs can be inserted at the same time.
Specification
44 × 442 × 460 mm (1.73 × 17.40 × 18.11 in.)
7.5 kg (16.53 lb)
Specification