HP A6602 Installation Manual page 71

Updating an Application Using FTP Updating an Application Using FTP
When the application file is large, you can also update it using FTP to save update and When the application file is large, you can also update it using FTP to save update and When the application file is large, you can also update it using FTP to save update and
maintenance time.
File Transfer Protocol (FTP) is an application layer protocol in the TCP/IP suite. It is mainly used File Transfer Protocol (FTP) is an application layer protocol in the TCP/IP suite. It is mainly used File Transfer Protocol (FTP) is an application layer protocol in the TCP/IP suite. It is mainly used
for file transfer between remote hosts. FTP provides reliable and connection for file transfer between remote hosts. FTP provides reliable and connection-oriented data for file transfer between remote hosts. FTP provides reliable and connection
transfer service over TCP. Compared with TFTP, the FTP software is much bigger. transfer service over TCP. Compared with TFTP, the FTP
There are two approaches to updating an application file using FTP: There are two approaches to updating an application file using FTP:
On the BootWare menu. In this approach, the router can serve as the FTP client only. On the BootWare menu. In this approach, the router can serve as the FTP client only. On the BootWare menu. In this approach, the router can serve as the FTP client only.

At the CLI. In this approach, the router can serve as the FTP server or the FTP client. At the CLI. In this approach, the router can serve as the FTP server or the FTP client. At the CLI. In this approach, the router can serve as the FTP server or the FTP client.

Updating an Application Using FTP on the BootWare Menu Updating an Application Using FTP on the BootWare Menu
1) Set up an FTP update environment. Set up an FTP update environment.
Figure 5-10 Set up an FTP update environment
The router serves as the FTP client and the PC serves as the FTP server. The router serves as the FTP client and the PC serves as the FTP server.

Connect the Ethernet interface GigabitEthernet 0/0 on the router to the PC Connect the Ethernet interface GigabitEthernet 0/0 on the router to the PC using a crossover

Ethernet cable. Ensure the connectivity between the router and the PC. In the example, the IP Ethernet cable. Ensure the connectivity between the router and the PC. In the example, the IP Ethernet cable. Ensure the connectivity between the router and the PC. In the example, the IP
address of GigabitEthernet 0/0 is 192.168.80.10, and that of the PC is 192.168.80.200. address of GigabitEthernet 0/0 is 192.168.80.10, and that of the PC is 192.168.80.200. address of GigabitEthernet 0/0 is 192.168.80.10, and that of the PC is 192.168.80.200.
Enable FTP server on the PC and set the path Enable FTP server on the PC and set the path where the application file is stored.

Set the FTP username and password. Set the FTP username and password.

The FTP server is not installed on the The FTP server is not installed on the A6602. You need to purchase and install it yourself.

You can update the applications of the You can update the applications of the A6602 through GigabitEthernet 0/0 only.

For step 2 through step 4, refer to the corresponding steps in " For step 2 through step 4, refer to the corresponding steps in
TFTP on the BootWare Menu TFTP on the BootWare
Updating and Backing Up an Application Using FTP at the CLI Updating and Backing Up an Application Using FTP at the CLI Updating and Backing Up an Application Using FTP at the CLI
Router serving as the FTP client and PC serving as the FTP server Router serving as the FTP client and PC serving as the FTP se
1) Set up the updating environment, refer to Set up the updating environment, refer to "
Menu" on page 5-21.
Set up an FTP update environment
Menu" on page 5-16
software is much bigger.
where the application file is stored.
. You need to purchase and install it yourself.
igabitEthernet 0/0 only.
"Updating an Application Using FTP on the BootWare Updating an Application Using FTP on the BootWare
using a crossover
"Updating an Application Using Updating an Application Using
rver