Super Password Loss - HP A6602 Installation Manual

System start booting...
Booting Normal Extend BootWare....
3) Set a new password in system view after system reboot.
<HP> system-view
[HP] user-interface console 0
[HP-ui-console0] authentication-mode password
[HP-ui-console0] set authentication password simple 123456
The above information indicates that the password authentication is adopted on the console
interface and the password is set to 123456 and stored in plain text.
Set the password by using the set authentication password { cipher | simple } password
command.
If the cipher keyword is specified, the password is stored in cipher text. You cannot view the

password by using the display current-configuration command.
If the simple keyword is specified, the password is stored in plain text. You can use the

display current-configuration command to view the password in the current configuration.
After reboot, the system runs with the initial default configuration, but the original configuration

file is still stored in the storage medium. To restore the original configuration, you can use the
display saved-configuration command to display the configuration, and then copy and
execute the configuration.
If the password is stored in plain text, you can use the display current-configuration

command to view the password in the current configuration. If the password 123456 is set with
the set authentication password cipher command, the password is stored in cipher text.
4) Save the new password.
[HP] save
Execute the save command after modifying the user password to save the new password.

You are recommended to save the modification as the default configuration file.


Super Password Loss

The super password enables you to switch between four super levels. In the case of super
password loss, you cannot perform higher level operations.
You can clear the super password by selecting 8 on the main menu.
========================<EXTEND-BOOTWARE MENU>========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Modify BootWare Password
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Clear Super Password
|<9> Storage Device Operation
|<0> Reboot
======================================================================
Enter your choice(0-9):8
|
|
|
|
|
|
|
|
|
|