HP A6602 Installation Manual page 75

The FTP service is enabled after the authentication and authorization of the FTP server are

configured. The FTP server supports multi-client access. A remote FTP client sends a request
to the FTP server. The FTP server executes an action accordingly and returns the execution
result to the client.
After you configure the FTP server authentication and authorization, you need to set the user

level to 3. Otherwise, the system prompts that "You have no rights to store files" when you
restore the backed-up file to the router. For configurations of user levels, refer to HP SR6600
Routers User Manual.
3) Enable the FTP client program on the PC.
In the following example, the FTP client program is the built-in Windows XP FTP client:
Enter ftp in the DOS window:
C:\Documents and Settings\Administrator>ftp
ftp>
ftp> open 192.168.80.10
Connected to 192.168.80.10.
220 FTP service ready.
User (192.168.80.10:(none)): guest
331 Password required for guest
Password:
230 User logged in.
Table 5-12 Description on the display information of enabling FTP client
Display information
C:\Documents and
Settings\Administrator>ftp
ftp> open 192.168.80.10
User (192.168.80.10:(none))
331 Password required for guest
230 User logged in
4) Update an application file.
Using FTP, you can upload an application file from the client to the server, and overwrite the
original main application file to implement the application updating. The updated application file
takes effect when the router reboots.
# Upload file main_bac.bin from the PC to the router, and saves it as main.bin.
ftp> binary
200 Type set to I.
ftp> lcd d:\update
Local directory now D:\update.
ftp> put main.bin main.bin
200 Port command okay.
150 Opening BINARY mode data connection for /main.bin.
226 Transfer complete.
Enable the FTP client program on the PC.
In FTP client view, log into the IPv4 FTP server.
Input the username configured on the FTP server.
Input the password.
You have logged into the FTP server successfully.
Description