Table of Contents
Advertisement
Compliant standard
Baud rate
Transmission distance
Services
3)
Console cable
The console cable is an 8-core shielded cable. The R
connected to the console port on the router, and the DB
connected to the console port on the router, and the DB-9 female connector at the other end to
the serial port on a configuration terminal.
the serial port on a configuration terminal.
Figure 1-6
illustrates the console cable.
illustrates the console cable.
Figure 1-6 Console cable
Table 1-11 Console cable conn
Console cable connector pinouts
RJ-45 pin
1
2
3
4
5
6
7
8
For the connection of the console cable, refer to "Connecting the Console Cable" in Chapter 3
For the connection of the console cable, refer to "Connecting the Console Cable" in Chapter 3
For the connection of the console cable, refer to "Connecting the Console Cable" in Chapter 3
"Installing the Router".
AUX port
1)
Introduction
The AUX port is an RS-232 asynchronous serial interface used for remote configuration or
dialup backup. You need to connect the local modem to the remote modem through PSTN and
dialup backup. You need to connect the local modem to the remote modem through PSTN and
dialup backup. You need to connect the local modem to the remote modem through PSTN and
then to the remote device for remote system debugging, configuration, maintenance, and
then to the remote device for
management. In the event that the console port fails, the AUX port can be connected to a
management. In the event that the console port fails, the AUX port can be connected to a
management. In the event that the console port fails, the AUX port can be connected to a
Item
RS-232
9600 bps to 115200 bps
9600 bps (default)
≤ 15 m (49.21 ft.)
Connection to an ASCII terminal
Connection to the serial interface of a local PC to run the terminal emulation
Connection to the serial interface of a local PC to run the terminal emulation
program
Command line interface (CLI)
core shielded cable. The RJ-45 connector at one end of the cable is
Signal direction
—
232 asynchronous serial interface used for remote configuration or
232 asynchronous serial interface used for remote configuration or
remote system debugging, configuration, maintenance, and
Specification
Specification
45 connector at one end of the cable is
9 female connector at the other end to
DB-9 pin
8
6
2
1
5
3
4
7
Signal
CTS
DSR
RXD
DCD
GND
TXD
DTR
RTS
Advertisement
Table of Contents
Troubleshooting
