Proxim Tsunami Multipoint MP-820-BSU-100 Installation Manual page 47

3.1.1.3 Antenna Ports
: Applicable only to MP-8100-BSU, MP-8100-SUA and QB-8100-EPA/LNK.
The Antenna Ports A1, A2 and A3 are used to connect external antenna (s). These antenna connectors are of N-Type female
with built-in surge protection.
: Use antenna port A1 for single polarization antennas, and antenna ports A1 and A3 for dual polarization antennas. By
default, A1 and A3 ports are enabled. Enable A2 port, in case you are using 3*3 antennas.
3.1.1.4 Grounding Points
To protect the device against lighting or ESD events, you must ground the device properly. To ensure proper grounding, use
either of the ground points that are situated at the bottom corner of the device and the grounding screw (#8-32 thread size)
provided to attach a ground wire of at least 10 AWG stranded to the device.
3.1.2 Product Package
Each shipment includes the items listed in the following table. Please verify that you have received all the parts in this
shipment, prior to installation.
What's in the Kit
MP-8100-BSU/
MP-8100-SUA/
MP-8150-SUR/
QB-8100-EPA/
QB-8150-EPR/
QB-8151-EPR
PoE Injector with Country
specific Power Cord
WD - US, UK and EU power cords
US - US power cord
EU - UK and EU power cords
RJ11 to DB9 Serial Connector
Connector Weather Proofing
Kit (2 sets)
EMI Toroids
®
Tsunami 800 and 8000 Series - Hardware Installation Guide
8000 Series - Hardware Overview and Installation
Image
MP-8100-BSU/SUA
QB-8100-EPA
MP-8150-SUR
QB-8150-EPR / QB-8151-EPR
47