Step 6: Assemble Mounting Hardware - Proxim Tsunami Multipoint MP-820-BSU-100 Installation Manual

800 Series - Hardware Overview and Installation

Step 6: Assemble Mounting Hardware

1. Fix the mounting plate (A) by using the provided screws and washers (Torque 9 N . m/75 in-lbs).
Mounting Plate
Mounting Plate fixed to the device
2. Fix the extension arm (B) to the fixed mounting plate with the provided screw, nut and washers. The extension arm
gives the device more possible tilt, letting you adjust for azimuth or elevation over a larger angle.
Extension Arm
Mounting Plate fixed to the
Extension Arm fixed to
device
Mounting Plate
3. Fix the mounting bracket (C) to fixed extension arm with the provided screw, nut and washers.
Mounting Bracket
Extension Arm fixed to
Mounting Bracket fixed to
Mounting Plate
Extension Arm
®
Tsunami 800 and 8000 Series - Hardware Installation Guide 21