Step 6: Assemble Mounting Hardware - Proxim Tsunami Multipoint MP-820-BSU-100 Installation Manual

Additional Weatherproofing Steps
To add an additional layer of protection to the connectors against the environment, see
For detailed explanation to weatherproof RF connections, refer to Antenna Installation Guide, which is available at
.

Step 6: Assemble Mounting Hardware

1. Fix the Mounting Plate (A) by using the provided screws and washers (Torque 9 N . m/75 in-lbs).
2. Fix the Extension Arm (B) to the fixed Mounting Plate with the provided screw, nut and washers. The Extension Arm
gives the device more possible tilt, letting you adjust for azimuth or elevation over a larger angle.
Extension Arm
3. Fix the Mounting Bracket (C) to fixed Extension Arm with the provided screw, nut and washers.
Mounting Bracket
4. Tighten the assembled parts (Torque 15 N . m/130 in-lbs).
®
Tsunami 800 and 8000 Series - Hardware Installation Guide
.
Mounting Plate
Mounting Plate fixed to the device
8000 Series - Hardware Overview and Installation
Mounting Plate fixed to the device
Extension Arm fixed to
Mounting Plate
Extension Arm fixed to
Mounting Plate
Mounting Bracket fixed to
Extension Arm
51