Install The Four-Bay Lff Hot-Plug Rear Drive Cage - HP Apollo 4200 Gen9 User Manual

For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website.

Install the four-bay LFF hot-plug rear drive cage

Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Remove the server from the rack.
4. Remove the access panel.
5. Remove the air baffle.
6. Remove the rear option blank.
Retain the blank for future use.
7. Install the four-bay LFF hot-plug rear drive cage:
a. Align the pins on the drive cage with the notches on the rear panel.
b. Tighten the thumbscrews to secure the drive cage to the rear panel.
c. Tighten the captive screws to secure the drive cage to the system board.
Install the four-bay LFF hot-plug rear drive cage 67