Dedicated Ilo Management Module Option - HP Apollo 4200 Gen9 User Manual

7. Install the access panel.
8. Install the server into the rack.
9. Connect the LAN segment cables.
10. Power up the server.

Dedicated iLO management module option

For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website.
CAUTION:
To prevent damage to electrical components, properly ground the server before beginning any
installation procedure. Improper grounding can cause ESD.
Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server
3. Remove the server from the rack.
4. Remove the access panel.
5. If installed, remove the rear drive cage.
6. Push the dedicated iLO management module blank out of the rear panel.
130 Dedicated iLO management module option