Remove The Pci Riser Cage - HP Apollo 4200 Gen9 User Manual

2. Secure all disconnected system cables in the cable management holder, and then connect them to the
system board and/or controller board.
3. Pull and hold the drive cage rail release latches, and then slide the drive cages back into the chassis.
4. Install the air baffle.

Remove the PCI riser cage

WARNING:
To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool
before touching them.
CAUTION:
To prevent damage to electrical components, take the appropriate anti-static precautions before
beginning any installation, removal, or replacement procedure. Improper grounding can cause
electrostatic discharge.
Remove the PCI riser cage 51