Remove A Rear Drive Cage - HP Apollo 4200 Gen9 User Manual

For more information on these cabling requirements, see the documentation that ships with the option.
4. Install the access panel.
5. Install the server into the rack.
6. Power up the server.

Remove a rear drive cage

WARNING:
To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool
before touching them.
CAUTION:
To prevent damage to electrical components, take the appropriate anti-static precautions before
beginning any installation, removal, or replacement procedure. Improper grounding can cause
electrostatic discharge.
Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Remove the server from the rack.
4. Remove the access panel.
5. Disconnect all cables from the drive backplane.
6. Remove the rear drive cage:
• Four-bay LFF hot-plug rear drive cage removal
• Two-bay SFF hot-plug rear drive cage removal
54 Remove a rear drive cage