Firmware Update Application In The Uefi System Utilities; Online Flash Components; Drivers; Software And Firmware - HP Apollo 4200 Gen9 User Manual

help fwupdate -b
9. Reboot the server.
A reboot is required after the firmware update for the updates to take effect, and for hardware stability to
be maintained.
For more information about the commands used in this procedure, see the UEFI Shell user guide on the
Hewlett Packard Enterprise website.

Firmware Update application in the UEFI System Utilities

For systems configured in either boot mode, update the firmware:
1. Access the System ROM Flash Binary component for your server from the Hewlett Packard Enterprise
Support Center website. When searching for the component, always select Cross operating system to
locate the binary file.
2. Copy the binary file to a USB media or iLO virtual media.
3. Attach the media to the server.
4. During POST, press F9 to enter System Utilities.
5. Select Embedded Applications > Firmware Update > System ROM > Select Firmware File.
6. Select the device containing the flash file.
7. Select the flash file. This step may take a few moments to complete.
8. Select Start firmware update and allow the process to complete.
9. Reboot the server. A reboot is required after the firmware update for the updates to take effect and for
hardware stability to be maintained.

Online Flash components

This component provides updated system firmware that can be installed directly on supported operating
systems. Additionally, when used in conjunction with SUM, this Smart Component allows the user to update
firmware on remote servers from a central location. This remote deployment capability eliminates the need for
the user to be physically present at the server to perform a firmware update.

Drivers

IMPORTANT:
Always perform a backup before installing or updating device drivers.
The server includes new hardware that may not have driver support on all OS installation media.
If you are installing an Intelligent Provisioning-supported OS, use Intelligent Provisioning and its Configure
and Install feature to install the OS and latest supported drivers.
If you do not use Intelligent Provisioning to install an OS, drivers for some of the new hardware are required.
These drivers, as well as other option drivers, ROM images, and value-add software can be downloaded as
part of an SPP.
If you are installing drivers from SPP, be sure that you are using the latest SPP version that your server
supports. To verify that your server is using the latest supported version and for more information about SPP,
see the Hewlett Packard Enterprise website.
To locate the drivers for a particular server, go to the Hewlett Packard Enterprise Support Center website.
Under Select your HPE product, enter the product name or number and click Go.

Software and firmware

Update software and firmware before using the server for the first time, unless any installed software or
components require an older version.
For system software and firmware updates, use one of the following sources:
172 Firmware Update application in the UEFI System Utilities