HP Apollo 4200 Gen9 User Manual page 68

8. Connect the power Y-cable:
a. Connect the common 5x2 connector to the system board.
b. Connect the smaller 5x2 connector to the drive backplane.
9. If you plan to use the Flexible Smart Array P840ar Controller to manage the rear LFF drives, connect the
rear drive cage to the front drive cage 2 backplane:
a. Release the preinstalled Mini-SAS x4 cable from the system board cable clips.
b. Remove the plastic cover from the released Mini-SAS x4 cable.
68 Hardware options installation