Installing A Hot-Plug Ac Power Input Module - HP Apollo 4200 Gen9 User Manual

CAUTION:
To prevent damage to electrical components, properly ground the server before beginning any
installation procedure. Improper grounding can cause ESD.
CAUTION:
Always install a power input module or a power supply blank into each bay to maintain proper airflow
and cooling in the power enclosure. Improper airflow can lead to thermal damage.
IMPORTANT:
Mixing different types of power input modules in the same server might limit or disable some power
supply features including support for power redundancy. To ensure access to all available features, all
power input modules in the same server should have the same output and efficiency ratings.
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website.

Installing a hot-plug AC power input module

Procedure
1. Access the product rear panel.
2. Remove the power supply blank.
3. Slide the power input module into the bay until it clicks into place.
4. Connect the power cord to the power supply.
Installing a hot-plug AC power input module 133