HP Apollo 4200 Gen9 User Manual page 101
Hide thumbs
Also See for Apollo 4200 Gen9:
- User manual (193 pages) ,
- Maintenance and service manual (157 pages) ,
- Product end-of-life disassembly instructions (7 pages)
Table of Contents
Advertisement
6.
If installed, remove the air scoop from the storage controller/HBA.
For more information, see the documentation that ships with the option.
7.
If you intend to use an FBWC module, install the module on the storage controller. Depending on the
controller model, the cable connector on the cache module might be facing up or down when the module
is installed on the controller board.
a. Connect the cache module backup power cable to the module.
b. Install the cache module on the storage controller.
8.
If installed, remove the rear drive cage.
9.
If installed, remove the six-bay SFF rear drive cage.
10. If an expansion board is installed on the PCI riser cage, remove the PCI riser cage.
11. Disconnect the Mini-SAS Y-cable from the Flexible Smart Array P840ar Controller port 1, and then
release it from the cable clip.
Hardware options installation
101
Advertisement
Table of Contents
