Remove The Front Panel/Drive Cage Assembly - HP ProLiant BL660c Gen9 User Manual

Remove the storage controller.
7.

Remove the front panel/drive cage assembly

Power down the server blade (on page 12).
1.
Remove the server blade (on page 13).
2.
Place the server blade on a flat, level work surface.
3.
Remove the access panel (on page 14).
4.
Do one of the following:
5.
Remove the storage controller (on page 17).
o
Disconnect the direct connect SATA cables
o
Remove all drives
6.
Remove all drive blanks
7.
Remove all DIMM baffles
8.
("Remove a drive" on page 14).
("Remove a hard drive
("Removing DIMM
("Direct connect SATA
blank" on page 14).
baffles" on page 14).
cabling" on page 60).
Operations 18