Table of Contents
Advertisement
CA-200
Hardware 1
Expected trouble causes
Key input is wrong.
Indications are garbled.
Printed characters are wrong.
Time indication is wrong.
Hardware 2
Expected trouble causes
The window is not displayed
even by turning on the power
switch. (Power is on.)
No printer paper feed
(Characters are printed in the
same position.)
A stirrer does not rotate or
rotation is unstable.
Countermeasures
Contact our local distributors.
Press [Function/C. Select] key to select
"Validation" and "Display Test" from "Hardware
Validation Test".
Press [Function/C. Select] key to select
"Validation" and "Printer Test" from "Hardware
Validation Test".
Press [Function/C. Select] key to select "Setting"
and "Clock Data Input".
Countermeasures
Contact our local distributors.
Press [Feed] key and check paper feed.
The printer can be jammed.
Turn off the power switch and remove jammed
paper with tweezers.
When the printer does not recover even after that,
contact our local distributors.
Remove a stirrer cable and connect it again.
When the stirrer does not recover even after that,
contact our local distributors.
9-3
Section 9: Troubleshooting
Advertisement
Table of Contents
