Table of Contents
Advertisement
Section 5: Moisture Measurement Mode
(1) Sample Name
Up to 13 characters can be inputted.
1. Alphameric characters and symbols
Press [Parameter/Character] key to display the input window.
Select characters with arrow keys and press [Enter] key.
Press [Parameter/Character] key again to end input.
2. Numbers
Press number keys.
* Press [Clear] key to delete the right characters from the cursor position.
(2) No: Measurement number
A measurement number is added every measurement.
When the power switch is turned on or when a file number is
changed, a measurement number is "1" automatically.
It can be changed manually.
(3) W: Sum (g) of sample weight and tare weight
Input the sum of sample weight and tare (sampler) weight.
It can be easily inputted by the electronic balance communication.
If it is not inputted by the measurement end, input is waited after measurement.
Up to 9 characters can be inputted.
Example: 12.34g
W: [1] key + [2] key + [.] key + [3] key + [4] key + [Enter] key
Sample Parameter
：
01 Name
： 1
02 No
：
03 W
：
04 w
Sample Name
5-14
CA-200
Press Character key.
Advertisement
Table of Contents
