CA-200
Section 5: Moisture Measurement Mode
5-3-2. File selection
By turning on the power switch, the titration window
File Select
01-20[01]
is displayed. To use the previous file,
proceed to 5-4-3. Sample parameters setting.
To use different files, press [Parameter /Character]
key, select a file with [↓] [↑] keys, and press
[Enter] key.
Proceed to 5-4-1. Titration parameter setting.
Select with ↑, ↓ and press Enter.
5-3-3. Multi-file selection
To use our recommended titration parameters, transfer parameters to the files 1 to 20 and use them.
Refer to "6-4-2. Multi file setting" for transfer method.
5-5