Table of Contents
Advertisement
Section 6: Function
6-1. Recalculation
Saved data can be recalculated, displayed, printed. 200 data are saved.
6-1-1. Result list indication
Saved data are listed in measurement order.
(Regardless of file numbers)
Up to 200 data can be saved and No 201 data are
overwritten in No. 001 data.
001
Sample A
ID No.
Sample name
ID No.: Numbers applied automatically by the unit They are as follows.
001→002･･･199→200→001→002･･･
The previous ID is registered even after turning on the power switch again.
Therefore serial numbers can be applied regardless of file numbers.
They are used to check printed data against data saved in the unit.
Sample name: Sample names are indicated.
Measurement No.: One number is added every measurement.
Analytical value: When analytical values are 0.1% or more, the unit is %.
When analytical values are under 0.1%, the unit is ppm.
Unit: Analytical value concentration unit
-1 : 12.34 ppm
No.
Analytical Unit
value
The number is "1" automatically at power supply and file change.
Recalculation
001 Sample A
002 Sample A
003 Sample B
004 Sample B
Date
2006/05/24 11
6-2
01- 200[01]
-1 : 12.34 ppm
-2 : 13.58 ppm
-1 : 124.14 ppm
-2 : 132.55 ppm
:
00：26
CA-200
Advertisement
Table of Contents
