Table of Contents
Advertisement
CA-200
After pressing [Parameter / Character] key and selecting a file with [↓] [↑] keys, press [Enter] key to
display the titration parameter window.
(1) File: File name
Input a file name to clear titration contents.
(up to 9 characters)
1. Alphameric characters and symbols
Press [Parameter/Character] key to display the input window.
Select characters with arrow keys and press [Enter] key.
Press [Parameter/Character] key again to end input. (The character input window is cancelled.)
2. Numbers
Press number keys.
* Press [Clear] key to delete the right characters from the cursor position.
(2) Delay: Titration start delay time
After pressing [Start/Stop] key, titration
start is delayed forcibly until the set time.
Set "Delay" when samples can not
solve shortly or using a vaporizer.
Example: 2 minutes Delay: [2] key + [Enter] key
Section 5: Moisture Measurement Mode
Titration Parameter F03 01-14
01 File Name : Acetone
02 Delay
03 Min Titr
04 Titr Stop : 0
File Name
Titration Parameter F03 01-14
01 File Name : Acetone
02 Delay
03 Min Titr
04 Titr Stop : 0
Delay time before titration
5-7
: 0
: 0
Press Character key.
: 2
: 0
0-99 ( ) min
Advertisement
Table of Contents
