Printer Roll Paper Setting - Mitsubishi CA-200 Instruction Manual

Section 2: Installation and Assembly CA-200

2-2-3. Printer roll paper setting

(1) Take off a printer cover. Do not take off it forcibly.
(2) Cut the end of printer paper in a perpendicular direction to the feed direction. Put the paper from a
roll paper inlet so that the back of paper faces to this side.
(3) Raise a lever, pass paper so that printing side is downside, and lower the lever.
(4) Pass roll paper through the cover and set the cover.
Illustration 2-3. Printer roll paper setting
CAUTION
After paper setting, set a printer cover necessarily.
The cutter of a printer cover is sharp.
Take care not to get hurt at the setting.
2-8