Table of Contents
Advertisement
CA-200
POINT
1. For "Titration Parameters" and "System Setting", just one setting file can be saved in
the same USB memory every channel.
2. By exporting titration parameters and system setting to the same USB memory, they
are overwritten in a current file.
3. Don't change an exported file name and a folder name. If changed, they can't be
imported normally.
7-1-2. Import
(1) Titration parameter export
1. Connect a USB memory to "USB A" in the
unit back.
2. Select "Titration parameter export" and press
[Enter] key.
The check window is displayed.
3. Select "Yes" and press [Enter] key.
Import is run. The check window is cancelled and titration parameters export is completed.
(2) System setting export
1. Connect a USB memory to "USB A" in the unit back.
2. Select "System setting export" and press [Enter] key.
The check window is displayed.
3. Select "Yes" and press [Enter] key.
Import is run. The check window is cancelled and system setting export is completed.
4. Turn off and on the power switch.
Import
01
Titration parameter export
02
System setting export
Select with ↑, ↓ and press Enter.
7-3
Section 7: Option
1-2[1]
Advertisement
Table of Contents
