Incoming Virtual Extension Ring Tone Order Setup - NEC SL2100 Installation Manual

SL2100

15-10 : Incoming Virtual Extension Ring Tone Order Setup

Level:
SA
Description
Use Program 15-10 : Incoming Virtual Extension Ring Tone Order Setup to set the priority (1 ~ 4)
Program
for the Virtual Extension Ring Tones set in Program 15-08. When Virtual Extension calls ring an
extension simultaneously, the tone with the highest order number (e.g., 1) rings. The other keys only
15
flash. There are 50 Virtual Extension ports.
Input Data
Item No.
01
Default
• By default, Virtual Extension ring tones have the following order :
Conditions
None
4-28
Program 15 : Extension, Basic Setup
Extension Number
Item
Priority Or- 1 ~ 4
der
Data 0 ~ 8
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming extension ring tone
5 = Melody1 (2W Digital/IP Multiline Termi-
nal)
6 = Melody2 (2W Digital/IP Multiline Termi-
nal)
7 = Melody3 (2W Digital/IP Multiline Termi-
nal)
8 = Melody4 (2W Digital/IP Multiline Termi-
nal)
Priority Order
1
2
3
4
Input Data
When two or more virtual
extensions are set on a
function key on the tele-
phone, and the tone pat-
tern by which the sound
of each extension differs,
the priority of ring sound
is set up.
Ring Tone (Set in Program 15-08)
Program 15 : Extension, Basic Setup
Maximum eight digits
Description Related Program
0 (Tone Pattern 1)
1 (Tone Pattern 2)
2 (Tone Pattern 3)
3 (Tone Pattern 4)
ISSUE 1.0
15-08