Switch-Over Weighing Unit; Weighing With Taring; Determination Of The Tare Weight By Weighing - KERN KXE-TM Operating And Installation Instructions

7.5 Switch-over weighing unit

The following setting must be allocated to a functional button (see chap. 9.).
Functional
button
When pressing the functional button, the weight display changes
between „kg" and „t".

7.6 Weighing with taring

7.6.1

Determination of the tare weight by weighing

Deposit weighing vessel. Wait for stability, then press
indicator above TARE and
The weight of the container is now internally saved.
Weigh the material, the net weight will be indicated.
After removing the weighing container, the weight of the weighing container appears
as negative display.
The taring process can be repeated any number of times, e.g. when adding several
components for a mixture (adding). The limit is reached when the whole weighing
range is exhausted.
To change between gross weight and net weight, press
To delete the tare value, remove load from weighing plate and press
KXE-TM-BA_IA-e-1110
Setting
FNC-02 „1"
or
FNC-03 „1"
or
FNC-04 „1"
+
will appear.
NET
. The zero display, the
.
.
17