Automatic Data Output „Auto - KERN KFC-TM Operating And Installation Instructions

14.1.2 Automatic data output „Auto"
Data output happens automatically without pressing the
corresponding output condition has been met, depending on the setting in the menu.
Enable function and set the output condition:
 In Setup menu invoke the menu setting „Print" „PrMod" and confirm with
button .
 For an automatic data output select the menu setting "Auto" with the navigation
keys  and confirm on
 Use the navigation keys  to select the setting „on" and confirm on
"zrAnGE" is displayed.


Confirm with
navigation keys  .

Confirm with

To exit the menu press the navigation key
Place goods to be weighed on balance:
 If required, place empty container on scale and tare.
 Place weighed goods and wait until the stability display (
The weighing value is issued automatically.
58
button.
button and set the required output condition with the
button
button, as soon as the
repeatedly.
) appears.
TKFC-TM-A-BA_IA-e-2212
button.