GE Multilin 850 Instruction Manual page 586

CURRENTS
NOTE:
6–6
Phase C (Ic RMS)
Range: 0.000 to 12000.000 A
Ground (Ig RMS)
Range: 0.000 to 12000.000 A
Sensitive Ground (Isg RMS)
Range: 0.000 to 1200.000 A
Neutral (In RMS)
Range: 0.000 to 12000.000 A
Phase A Angle (Ia Angle)
Range: 0.0 to 359.9°
Phase B Angle (Ib Angle)
Range: 0.0 to 359.9°
Phase C Angle (Ic Angle)
Range: 0.0 to 359.9°
Ground Angle (Ig Angle)
Range: 0.0 to 359.9°
Sensitive Ground Angle (Isg Angle)
Range: 0.0 to 359.9°
Neutral Angle (In Angle)
Range: 0.0 to 359.9°
Average (I AVG)
Range: 0.000 to 12000.000 A
Zero Sequence (I_0)
Range: 0.000 to 12000.000 A
Positive Sequence (I_1)
Range: 0.000 to 12000.000 A
Negative Sequence (I_2)
Range: 0.000 to 12000.000 A
Zero Sequence (I_0 Angle)
Range: 0.0 to 359.9°
Positive Sequence Angle (I_1 Angle)
Range: 0.0 to 359.9°
Negative Sequence Angle (I_2 Angle)
Range: 0.0 to 359.9°
Ground Differential (Igd)
Range: 0.000 to 12000.000 A
Ground Differential Angle (Igd Angle)
Range: 0.0 to 359.9°
Load (I%)
Range: 0.0 to 100.0 %
Percent of load-to-trip is calculated from the phase with the highest current reading. This
metered value is the ratio between the highest phase current injected for the current bank,
and the lowest pickup setting among all Phase Timed and Instantaneous overcurrent
elements. If all these elements are disabled, the value displayed is "0".
850 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: METERING