GE Multilin 850 Instruction Manual page 484

CONTROL
FASTPATH:
4–352
A Synchrocheck supervised UF Restore CLOSE command is sent directly to output #2. For
other outputs, logic has to be created for supervision as required.
BLOCK
Range: Off, Any FlexLogic operand
Default: Off
OUTPUT RELAY X
For details see Common
EVENTS
Range: Disabled, Enabled
Default: Enabled
TARGETS
Range: Disabled, Self-reset, Latched
Default: Self-reset
Setpoints.
850 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 4: SETPOINTS