CyberData 011233 Operation Manual page 69

2. On the Autoprovisioning page, you may enter values for the parameters indicated in
Note
Disable Autoprovisioning
Autoprovisioning Server
Autoprovisioning Filename
Use tftp
Username
Password
Autoprovisioning autoupdate 
(in minutes)
Autoprovision at time (HHMMSS)
Autoprovision when idle
(in minutes > 10)
CyberData Corporation
16.
The question mark icon (
after the Toggle Help button is pressed
Table 2-16. Autoprovisioning Configuration Parameters
Web Page Item
) in the following table shows which web page items will be defined
.
Prevent the device from automatically trying to download a
configuration file. See
more information.
Enter the address of the provisioning server as a fqdn or IPv4
address in dotted decimal notation.
The name of the configuration file. The default
autoprovisioning filename is in the format of <mac
address>.xml.
Supported filename extensions are ".txt", and ".xml." The
current filename is denoted by an asterisk at the bottom of
the Autoprovisioning
A file may have any name with an xml extension. If a file
name is entered, the device will look for the specified file
name, and only that file.
The device will use TFTP (instead of http) to download
autoprovisioning files.
The username used to authenticate with an autoprovisioning
server. Leave this field blank to disable authentication.
The password used to authenticate with an autoprovisioning
server. Leave this field blank to disable authentication.
The reoccurring time (in minutes) the device will wait before
checking for new autoprovisioning files. Enter up to 6 digits. A
value of 0 will disable this option.
Note: To use the auto update options, enable the
with NTP Server on boot
page (see
The time of day the device will check for a new
autoprovisioning file. The time must be 6 characters in length
and in HHMMSS format. An empty value will disable this
option.
Note: To use the auto update options, enable the
with NTP Server on boot
page (see
The idle time (in minutes greater than 10) after which the
device will check for a new autoprovisioning file. Enter up to 6
digits. A value of 0 will disable this option.
Note: To use the auto update options, enable the
with NTP Server on boot
page (see
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
931087G
Setting Up the SIP Paging Adapter
Configure the Autoprovisioning Parameters
Description
Section 2.6.12.1, "Autoprovisioning"
Page. Enter up to 256 characters.
setting on the
Table 2-5).
setting on the
Table 2-5).
setting on the
Table 2-5).
Operations Guide
61
Table 2-
for
Set Time
Device Page
Set Time
Device Page
Set Time
Device Page